Hot new item wins SEMA awards!

Enhance the interior of your vehicle to a sporty yet classy look has never been so easy. With these Aluminum Diamond Plate Floor Mats, you can alter your car from the dull OEM look to the absolute maximum appearance. These Aluminum Diamond Plate Floor Mats will extend the life of your vehicle's floor. With precise engineering and quality-manufactured material, these Aluminum Diamond Plate Floor Mats are immune to dirt, grease and snow. Stunning and durable in any weather, these floor mats are an absolute breeze to clean.

The use of these floor mats insures that your carpet will stay as clean and safe as the day you purchased the vehicle. Additionally, Installing our neon lighting under the dashboard will create a spectacular reflection at night that the will amaze you and your passengers. Improve your everyday driving experience with these Aluminum Diamond Plate Floor Mats.

Upgrade those old pedals.

Give a unique look and feel to your interior with new pedals.

Pedals don't seem like much but when you think about it, they are the one thing that connects you to your engine. Look at the pedals you have now, are they plain, stock, boring. Well maybe its time to upgrade. The choices are practically unlimited, take a look at some I found.








Pedals are made from many types of materials, carbon fiber and aluminum are the most popular. Installing pedals is an easy way to customize the interior of your car. They can fit just about every model of vehicle. It only takes minutes and when your done you will be connected to your engine with some stylish functional pedals.

Dash Trim Install

CAUTION: (!) Before Installation: Do not peel off the red plastic on the back of each piece at this point.Check the proper fitment of each piece in your kit by putting it next to the dash.If anything doesn't match - STOP the installation and contact your local distributor. Please avoid direct skin contact or prolonged exposure with any chemical agent when working.(!) During Installation:Do not apply alcohol do dash trim where the trim pieces will not be overlayed.Do not apply alcohol to the trim glossy side of the pieces themselves. Adhesive Promoter dries quickly, use it first before applying any pieces.Do not overheat the trim pieces, if sunny and hot outside place the dash kit outside for 1 min so it will become flexible.We are not responsible for any damages made by the customer during and after the installation. Install at your own risk.

Follow these 5 easy steps:

Step 1 Clean the surface inside your car with the alcoholic pads provided. Surface must be clean from oils and grease, for the trim pieces to properly cure on the dash.(!) IF YOU HAVE ANY ARMORAL ON THE DASH THE PIECE WILL NOT STICK. YOU MIGHT HAVE TO BUY A SEPARATE ALCOHOL BOTTLE OR 3M PREP SOLVENT AND CLEAN IT THROUGHLY. TO CHECK IF THE SURFACE IS READY. TAKE YOUR FINGER AND SLIDE IT ON THE DASH AREA, IF ITS SLIPPERY OR OILY YOU MUST CLEAN IT BETTER. IT MUST BE DRY AND ROUGH.

Step 2 Align all the pieces on the floor so you have an idea where the pieces go, take the back cover off the pieces and align them accordingly. Take the rubber glove (provided with your kit) and put it on your hand. Carefully open and apply the adhesive promoter applicator (provided with your kit) to the surfaces of the dash panel of your car and the adhesive part of the dash trim pieces themselves. For the dash panel you must apply to places only where the trim pieces will overlay. Once you open the promoter, go through all the areas very quickly. You'll have approximately one minute with each packet so use it wisely. Let it dry for 2 minutes.

Step 3 The installation location must be at room temperature of about 70 F. You will paste the trim pieces to your dash panel like a sticker to a paper. Make sure you check to see they align properly and simply stick it right on.

Step 4 Make sure your hands are clean during this procedure. If you have some promoter on your fingers, this will stain the glossy finish of the dash trim pieces. Once the piece is applied, use a heat gun or hair dryer to cure it to the dash. Warm the piece up and press against it with your fingers. Make sure all the edges are sticking. If for some reason you can't get it to stick use some adhesive glue not included (ex. krazy glue) to get it to stick very well.(!) DO NOT OVERHEAT THE PIECES OR THE DASH.T.

Step 5 Clean the dash trim with furniture polish and cotton towel, to get rid of any finger prints or tackiness if any. If you need to rid of any promoter stains you may purchase a chemical called goo gone from a local hardware store. ENJOY!!